Glossary Updates16 new terms added to the glossaries · November 12, 2026, 21:23 CET
AI TechDocKnowledge

Glossary · PLC and control programming

Deterministic control

Also known as: Deterministic behavior, Deterministic execution

German: Deterministische Steuerung

In control engineering, deterministic control means that a controller produces the same outputs from the same inputs and state and reacts within a known worst-case time, so its behavior can be predicted and verified.

  • PLC programming
  • Functional safety
  • OT security

In one sentence

Deterministic control means the same inputs give the same outputs within a known worst-case time – the basis for verifiable safety functions.

Example

A cyclic PLC task with a fixed 10 ms interval and a maximum jitter of 0.2 ms is deterministic; a PC application that answers "usually within 50 ms" is not.

How it applies

  • Engineering: Determinism comes from cyclic or time-triggered tasks, a bounded program length, no unbounded loops or waits, and a network with guaranteed timing. It concerns both the logic (same result) and the timing (known worst case).
  • Documentation: State which paths are deterministic and give their worst-case times; mark non-deterministic parts (HMI, cloud links, best-effort traffic) as outside the safety functions.

In risk assessment, PL analysis and security analysis

  • Risk assessment (CE): A safety function can only be relied on when its behavior is predictable. Non-deterministic behavior has to be treated as a possible fault in the risk assessment.
  • PL analysis: The response time in the safety requirements specification and the minimum distance under ISO 13855 need a worst case, which only a deterministic path provides. See Scan cycle and Real-time system.
  • Security analysis: Non-deterministic paths (variable load, shared networks, background services) are where an attacker can add delay. Under IEC 62443 this is resource availability (FR 7); keep the deterministic paths separate and limit what may load them.

Naming this term in a document never shows conformity; the risk assessment, the validation of the safety functions and the security risk assessment do. EN 50742 is a CENELEC draft as of the review date: it is neither law nor a source of presumption of conformity.

Deterministic vs. fast

Fast means a short average reaction; deterministic means a known upper limit. A slow but deterministic controller can carry a safety function; a fast one with an unknown worst case cannot.

By knowledge.aitechdoc.world · Published October 12, 2026 · Last reviewed

Source: AI TechDoc Knowledge editorial definition, based on IEC 61508, ISO 13849-1 and IEC 62443

Definitions follow the cited standards and specifications. Where a source is a copyrighted publication, such as an ISO, IEC or EN standard, the definition is a close paraphrase, not a verbatim quotation, so as not to infringe copyright. We recommend reading the original publication. The sections “How it applies” are editorial commentary by AI TechDoc Knowledge and are not part of any standard.

Seen a mistake? Send us a note!