Glossary Updates16 new terms added to the glossaries · November 12, 2026, 21:23 CET
AI TechDocKnowledge

Glossary · Industrial communication

Remote I/O

Also known as: Distributed I/O, Decentralized I/O, Remote I/O station

German: Dezentrale Peripherie

In industrial automation, remote I/O is input and output modules installed close to the sensors and actuators, away from the controller, and connected to it via a fieldbus or Industrial Ethernet instead of individual wires.

  • Industrial communication

In one sentence

Remote I/O places input and output modules near sensors and actuators and connects them to the controller over a network.

Example

Each module of a long conveyor has an IP67 remote I/O block that collects the local sensors and sends their states to the central PLC over PROFINET.

How it applies

  • Engineering: Remote I/O reduces cabling and cabinet size. Stations can be cabinet-mounted (IP20, DIN rail) or machine-mounted (IP67). The station acts as a device on the network; its modules form the I/O image.
  • Commissioning: Module configuration in the controller must match the physical station. Loss of the station must be detected and handled by the control program.
  • Safety: Safety I/O modules in remote stations transmit safety signals over safety protocols such as PROFIsafe or FSoE. The safety function remains the responsibility of the whole system design.
  • Documentation: The documentation team shows station locations, module order and addresses, and describes behavior on communication loss (substitute values) and the module replacement procedure.

Remote I/O vs. remote access

Remote I/O is about where the I/O hardware sits. Remote access is about reaching a system from outside, for example for service. The German "dezentrale Peripherie" always means remote I/O.

In risk assessment, PL analysis and security analysis

  • Risk assessment (CE): Distributed I/O moves signals of safety functions onto a network. Loss of communication must lead to a defined, safe reaction of the outputs (substitute values, de-energizing), and that reaction is assessed for every station.
  • PL analysis: Safety signals travel over a safety protocol that treats the network as a black channel (PROFIsafe, FSoE, CIP Safety) and detects corruption, loss, delay and wrong addressing. Its watchdog time adds to the response time of the safety function and thus to the minimum distance.
  • Security analysis: The black channel protects against errors, not against deliberate attacks: it is not encryption or authentication. Networked I/O widens the attack surface; place it in zones and conduits under IEC 62443 and limit who can reach it.

Naming this term in a document never shows conformity; the risk assessment, the validation of the safety functions and the security risk assessment do. EN 50742 is a CENELEC draft as of the review date: it is neither law nor a source of presumption of conformity.

By knowledge.aitechdoc.world · Published September 26, 2026 · Last reviewed

Source: AI TechDoc Knowledge editorial definition, based on distributed I/O practice

Definitions follow the cited standards and specifications. Where a source is a copyrighted publication, such as an ISO, IEC or EN standard, the definition is a close paraphrase, not a verbatim quotation, so as not to infringe copyright. We recommend reading the original publication. The sections “How it applies” are editorial commentary by AI TechDoc Knowledge and are not part of any standard.

Seen a mistake? Send us a note!