Glossary Updates16 new terms added to the glossaries · November 12, 2026, 21:23 CET
AI TechDocKnowledge

Glossary · Electrical engineering and control panels

I/O module

Also known as: Input/output module, I/O card, Signal module

German: I/O-Modul

In industrial control, an I/O module is a hardware module that connects field signals, such as sensor inputs and actuator outputs, to a controller, converting them between electrical signals and data in the controller's process image.

  • Control panels

In one sentence

An I/O module connects sensor and actuator signals to a controller, converting between electrical signals and process data.

Example

The PLC rack contains a 16-channel digital input module, an 8-channel relay output module and a 4-channel analog input module.

How it applies

  • Engineering: I/O modules are chosen by signal type, channel count, diagnostics, isolation and whether they sit in the controller rack or in remote I/O stations on a fieldbus. Channel-level diagnostics (wire break, short circuit) simplify troubleshooting.
  • Maintenance: Many modules can be replaced with removable terminal connectors without rewiring; some systems support hot swap. Check the manufacturer's rules before removing modules under power.
  • Documentation: The I/O list and circuit diagram map each channel to its field device and tag. Keep module types and firmware versions in the configuration documentation.

I/O module vs. I/O system

An I/O module handles a set of channels. The I/O system is the whole arrangement of modules, head stations, backplane and communication that connects them to the controller.

In risk assessment, PL analysis and security analysis

  • Risk assessment (CE): Whether an input or output module is standard or safety-rated decides what it may carry: a safety function needs safety I/O (or a separate safety device), a standard module may only report.
  • PL analysis: Safety I/O modules detect wire break, short circuit and cross circuit (test pulses, read-back of outputs); these diagnostics feed the diagnostic coverage of the input and output subsystems. Take the module's PFHD or MTTFD and DC from the manufacturer's data for the SRP/CS calculation.
  • Security analysis: Manipulating I/O – forcing, overwriting the process image, spoofing values on the network – is a classic attack. Protect force and write access (roles, passwords, logging) and keep safety I/O on safety communication only.

Naming this term in a document never shows conformity; the risk assessment, the validation of the safety functions and the security risk assessment do. EN 50742 is a CENELEC draft as of the review date: it is neither law nor a source of presumption of conformity.

By knowledge.aitechdoc.world · Published September 26, 2026 · Last reviewed

Source: AI TechDoc Knowledge editorial definition, based on PLC hardware practice (IEC 61131-2)

Definitions follow the cited standards and specifications. Where a source is a copyrighted publication, such as an ISO, IEC or EN standard, the definition is a close paraphrase, not a verbatim quotation, so as not to infringe copyright. We recommend reading the original publication. The sections “How it applies” are editorial commentary by AI TechDoc Knowledge and are not part of any standard.

Seen a mistake? Send us a note!