Glossary · Electrical engineering and control panels
Field device
Also known as: Field instrument, Field-level device
German: Feldgerät
In automation, a field device is a sensor, actuator or other device at the field level that acquires process values or acts on the process and is connected to a controller directly or over a fieldbus or industrial network.
- Control panels
- Functional safety
- OT security
In one sentence
A field device is a sensor or actuator at the field level, wired or networked to the controller – where a safety function starts and ends.
Example
The light curtain, the safety door switch and the valve terminal of a press are field devices; the safety PLC that links them is not.
How it applies
- Engineering: Field devices range from simple switches to smart devices with their own firmware, parameters and diagnostics, connected by wiring, IO-Link or a fieldbus.
- Documentation: List type, firmware version, parameters and wiring of every safety-relevant field device; they appear in the circuit diagram, the I/O list and the safety calculation.
In risk assessment, PL analysis and security analysis
- Risk assessment (CE): Most safety functions start with a sensor and end with an actuator in the field. Their failure modes (stuck contact, drifting value, valve not switching) and their reasonably foreseeable manipulation (bypassed door switch) belong in the risk assessment.
- PL analysis: Under ISO 13849-1 the input and output subsystems are often the field devices: their MTTFD (from B10D for electromechanical parts), their diagnostics and their arrangement (one or two channels) usually decide the Performance Level of the whole function.
- Security analysis: Field devices are often physically reachable and rarely protected; smart devices add configuration interfaces and firmware. Under IEC 62443 they are components with their own requirements; physical access and parameter changes need protection.
Naming this term in a document never shows conformity; the risk assessment, the validation of the safety functions and the security risk assessment do. EN 50742 is a CENELEC draft as of the review date: it is neither law nor a source of presumption of conformity.
Field device vs. I/O module
A field device sits in the process; an I/O module sits in the controller or a remote station and converts the field device's signals.