Glossary · Stopping functions and safe states
Safe state
German: Sicherer Zustand
In machine safety and functional safety, a safe state is a condition in which risk has been reduced to an acceptable level for the relevant situation. What counts as safe depends on the machine, the hazard and the task being performed.
- Machine safety
- Risk assessment
In one sentence
A safe state is any condition in which risk is acceptable for the situation at hand, which is not always the same as “stopped” or “off”.
Example
For a press, the safe state for tool change is ram at bottom dead center, blocked and de-energized; for a ventilation system in a paint booth, the safe state after a fault may be running fans, not stopped ones.
Explained in context
Context cards connect this term with others to answer one question. Also in British English and German.
How it applies
- Machine safety: The safe state follows from the risk assessment and acceptable risk, not from habit. Removing power is often safe, but not when it releases a load, stops cooling or opens a clamp.
- Integrated systems: Fail-safe behavior means that faults lead to the safe state. In a line, one machine’s safe state must not create an unsafe condition in the next.
- Technical documentation: Write the concrete defined safe state for each situation instead of the generic phrase “bring the machine into a safe state”, which users cannot act on.
- Evidence: Each safety function should reference the safe state it achieves, so validation can test against it.
Safe state vs. stopped state
A stopped machine can still hold stored energy, a raised load or hot surfaces. A safe state is judged by the remaining risk, not by the absence of motion.