Glossary Updates16 new terms added to the glossaries · 12 November 2026, 21:23 CET
AI TechDocKnowledge
  • English (US)
  • English (UK)
  • Deutsch
All context cards

Context card

Machine instructions and CRA user information: one information set, two sets of rules

What does the Cyber Resilience Act add to the instructions of a connected machine?

By knowledge.aitechdoc.world

Reviewed

Review log and changes

The short answer

A security part with its own minimum content. From December 11, 2027, a machine that is a product with digital elements is accompanied by the information and instructions of CRA Annex II — vulnerability contact, intended purpose and security environment, foreseeable cybersecurity risks, the end date of the support period, secure commissioning, updates and decommissioning — in paper or electronic form, available for at least ten years or the support period. The machinery instructions stay as they are; both can live in one information set.

For: Technical writers and documentation managers at machine builders; product security and CE coordinators

Key points

  • Machinery law and the CRA ask for different information; neither replaces the other.
  • Annex II is a minimum list: contact, vulnerability reporting, identification, intended purpose, risks, declaration, support, instructions, SBOM if published.
  • The support period end date, at least month and year, is stated at purchase and in the user information.
  • Paper or electronic form; available for at least ten years or the support period, whichever is longer.
  • Security information changes with updates — it needs its own owner and change process.

The context

Two sets of rules for one machine

The Machinery Regulation asks for instructions that let users commission, operate and maintain the machine safely (Annex III, section 1.7.4). The Cyber Resilience Act asks, for products with digital elements, for information and instructions to the user that let them install, operate and use the product securely (Article 13(18), Annex II). A machine with a network interface, remote service or updatable control software is typically both. The two lists overlap only at the edges — identification, intended purpose, commissioning, decommissioning — and neither replaces the other.

What Annex II adds

Annex II point What the user is told
1, 2 Manufacturer and contact; the single point of contact for vulnerabilities and where the coordinated vulnerability disclosure policy is
3, 4 Product identification; intended purpose including the security environment, essential functions and security properties
5 Known or foreseeable circumstances that may lead to significant cybersecurity risks, also in reasonably foreseeable misuse
6 Where the EU declaration of conformity can be accessed, where applicable
7 The type of security support and the end date of the support period
8 Secure commissioning and use, how changes affect data security, how updates are installed, secure decommissioning with removal of user data, how to turn off automatic updates, what an integrator needs
9 Where the SBOM is, if the manufacturer makes it available

One information set

The CRA allows paper or electronic form; the Machinery Regulation allows digital instructions under its own conditions. One digital information set can serve both if it meets both:

  • Availability: machinery instructions for the expected lifetime and at least ten years; CRA information for at least ten years or the support period, whichever is longer. Plan for the longer of the two.
  • Structure: a security chapter in the instruction handbook, or a security leaflet linked from it — the content counts, not the container. IEC/IEEE 82079-1 helps to plan the information set and its audiences.
  • Change: the machinery instructions change with the machine; the security information changes with every update, vulnerability and support decision. Give it an owner and a change process of its own, and version it with the software state, not only with the mechanical build.

Where safety and security meet

Some security information is also safety-related: an update that restarts a control system, or a disabled automatic update that leaves a known vulnerability open. Where a cybersecurity event can affect safety, the risk assessment under machinery law decides what the safety instructions say; the CRA information doesn't replace it.

What this card does not say

It names the content the CRA lists, not whether a machine is in scope or which conformity route applies. The obligations apply from December 11, 2027; check the product category and the current guidance before you plan.

Questions readers ask next

Can the CRA information go into the instruction handbook?
Yes. The CRA asks for the content and its availability, not for a separate document. A security chapter in the handbook, or a separate security leaflet linked from it, both work if every Annex II point is covered and kept current.
Do we have to publish the SBOM?
No. Annex II point 9 applies only if the manufacturer decides to make the SBOM available to users. The SBOM is part of the CRA technical documentation in every case.
Who writes the security part?
Usually product security delivers the facts — contact, support period, update procedure — and the documentation team writes them for the user. Agree who keeps them current, because they change with every update and vulnerability.

Sources

  1. Regulation (EU) 2024/2847 (Cyber Resilience Act) — European Union (EUR-Lex), 20 November 2024Law adopted, not yet applicable: Adopted and published legislation whose obligations apply from a later date.
  2. Regulation (EU) 2023/1230 on machinery — European Union (EUR-Lex), 29 June 2023Law adopted, not yet applicable: Adopted and published legislation whose obligations apply from a later date.
  3. ISO 20607:2019 Safety of machinery — Instruction handbook — General drafting principles — ISO, 1 March 2019Harmonized standard (cited): A harmonized standard whose reference is published in the Official Journal of the EU; applying it can give a presumption of conformity for the requirements it covers.
  4. IEC/IEEE 82079-1:2019 Preparation of information for use (instructions for use) of products — Part 1 — IEC, 1 May 2019Standard: A published standard or specification. Not cited in the Official Journal as a harmonized standard, so it gives no presumption of conformity on its own.

Review log and changes

Every context card is checked against its sources before it is published, and again whenever it changes; the date under the byline is the last review. Corrections (something was wrong) and additions (something was missing) are logged below with date and time (Berlin time). Typos, formatting and link fixes are not listed.

Reviewed

No corrections or additions since publication.