Glossary Updates16 new terms added to the glossaries · November 12, 2026, 21:23 CET
AI TechDocKnowledge

Glossary · Safety information

ISO 20607 (instruction handbook for machinery)

Also known as: ISO 20607:2019, EN ISO 20607:2019, DIN EN ISO 20607, Instruction handbook standard

German: DIN EN ISO 20607 (Betriebsanleitung)

ISO 20607, Safety of machinery — Instruction handbook — General drafting principles, is the type-B machinery safety standard of ISO/TC 199 that specifies requirements for the safety-related parts of the instruction handbook of machinery, including assemblies of machinery and partly completed machinery: its general principles, the content and a recommended structure, and the drafting of safety and warning information. The first edition was published in 2019; its European adoption EN ISO 20607:2019 is a harmonized standard under the Machinery Directive 2006/42/EC.

  • Standards
  • Technical documentation

In one sentence

ISO 20607 sets drafting principles for the safety-related parts of a machine's instruction handbook — the machinery counterpart of IEC/IEEE 82079-1.

Example

A machine builder plans the instruction handbook of a palletizer along the structure ISO 20607 recommends — intended use, transport, installation, commissioning, operation, cleaning, maintenance, decommissioning — and writes each warning with the type and source of the hazard, its consequences and how to avoid it.

Explained in context

Context cards connect this term with others to answer one question. Also in British English and German.

How it applies

  • Scope: ISO 20607 deals with the safety-related content of the instruction handbook of machinery. It makes the requirements for information for use in ISO 12100, clause 6.4, concrete: the instruction handbook is the third step of the three-step method, after inherent safe design and safeguarding, and informs users about the residual risks.
  • Content and structure: The standard lists what the handbook has to cover over the machine's life — identification, intended use and reasonably foreseeable misuse, transport, installation, commissioning, operation, setting, cleaning, maintenance, troubleshooting, decommissioning and disposal — and recommends a structure for it. The structure is a recommendation; the manufacturer may choose another one.
  • Warnings: It describes how to draft safety and warning messages: signal word, type and source of the hazard, consequences of disregarding it, and the means of avoiding it.
  • Media: It names printed and electronic media for the handbook but leaves the question whether a digital handbook is allowed to the applicable law. For machinery placed on the EU market from January 20, 2027 that is Article 10(7) of the Machinery Regulation (see digital instructions for use).
  • Presumption of conformity: EN ISO 20607:2019 was first cited in the Official Journal under the Machinery Directive on April 2, 2020 (Implementing Decision (EU) 2020/480) and is listed in Implementing Decision (EU) 2023/1586. The citation gives a presumption of conformity only for the essential requirements it covers, with the limitations stated in the citation — check the current list. A citation under the Directive does not carry over to the Machinery Regulation by itself; check whether the standard is cited under Regulation (EU) 2023/1230.
  • Revision: A second edition (ISO/FDIS 20607) was registered for formal approval in January 2026; the draft adds requirements for a fully digital instruction handbook. Re-check the edition before citing it.

ISO 20607 vs. IEC/IEEE 82079-1

IEC/IEEE 82079-1 is the horizontal standard for information for use of products of all kinds: target audiences, the information management process, the competencies of the people who prepare it and the evaluation of the information. ISO 20607 is narrower and machinery-specific: it concentrates on the safety-related parts of the handbook and refers to IEC/IEEE 82079-1 for the preparation process. A handbook written to ISO 20607 can still fall short of IEC/IEEE 82079-1, and neither standard decides on its own what the law requires.

External references