Glossary Updates16 new terms added to the glossaries · November 12, 2026, 21:23 CET
AI TechDocKnowledge

Glossary · Risk assessment and risk reduction

Harm

In machine safety, harm is physical injury or damage to health. It is the outcome that risk assessment tries to prevent, and its severity is one of the two elements of risk.

  • Machine safety
  • Risk assessment

In one sentence

Harm is the physical injury or damage to health that a hazard can cause; how bad it can be determines the severity used in risk estimation.

Example

On a press brake, the possible harm from the closing tool is crushing or amputation of fingers, which is rated as a serious, irreversible injury.

Explained in context

This term is a station of a mini course

  • The medical-device evidence chain: from intended purpose to post-market evidenceStation: Risk management fileStart the course

Context cards connect this term with others to answer one question. Also in British English and German.

How it applies

  • Risk assessment: Estimate harm realistically for each hazard: the most severe credible injury, not only the most likely one. The severity of harm feeds directly into risk estimation.
  • Scope: ISO 12100 limits harm to injury and damage to health. Damage to property, the machine or the environment may be assessed as well, but should be kept separate so that safety decisions are not diluted.
  • Technical documentation: A good warning message names the consequence, that is, the harm, in concrete terms (“can crush fingers”), not only the hazard.
  • Evidence: Accident and near-miss data from the field help validate the assumed harm.

In medical devices (ISO 14971)

ISO 14971:2019 defines harm as injury or damage to the health of people, or damage to property or the environment. Severity of harm is weighed together with its probability; the residual risk is then put against the clinical benefit in the benefit-risk determination of the MDR. Warnings in the IFU name the harm in terms the user understands, and the risk control measure they belong to stays traceable.

Harm vs. hazard

A hazard is the potential source (a closing tool); harm is the result for a person (a crushed finger). Risk connects the two through probability and severity.

By knowledge.aitechdoc.world · Published September 25, 2026 · Last reviewed

Source: ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction

Definitions follow the cited standards and specifications. Where a source is a copyrighted publication, such as an ISO, IEC or EN standard, the definition is a close paraphrase, not a verbatim quotation, so as not to infringe copyright. We recommend reading the original publication. The sections “How it applies” are editorial commentary by AI TechDoc Knowledge and are not part of any standard.

Seen a mistake? Send us a note!