Glossary Updates16 new terms added to the glossaries · November 12, 2026, 21:23 CET
AI TechDocKnowledge

Glossary · Risk assessment and risk reduction

Hazard

Also known as: danger source

In machine safety, a hazard is a potential source of injury or damage to health. Hazards are usually classified by origin, such as mechanical or electrical, or by the nature of the potential harm, such as crushing or burns.

  • Machine safety
  • Risk assessment

In one sentence

A hazard is a potential source of harm; identifying every hazard over the whole machine lifecycle is the starting point of any machine risk assessment.

Example

A CNC lathe presents mechanical hazards from the rotating chuck, ejection hazards from chips and workpieces, electrical hazards in the control cabinet and noise hazards during cutting.

Explained in context

This term is a station of a mini course

  • The medical-device evidence chain: from intended purpose to post-market evidenceStation: Risk management fileStart the course

Context cards connect this term with others to answer one question. Also in British English and German.

How it applies

  • Risk assessment: Identify hazards for every lifecycle phase and operating mode, including setting, cleaning, troubleshooting and maintenance. ISO 12100 provides lists of typical hazards to support a systematic search.
  • Evidence: Record each identified hazard in a hazard log or the risk assessment, with a unique ID that links it to measures, verification and instructions.
  • Technical documentation: Warnings should name the hazard, its consequence and how to avoid it. The DITA hazard statement structures exactly these parts.
  • AI and retrieval: Stable hazard IDs and a controlled hazard vocabulary make it possible to find every document that mentions a hazard when a design changes.

In medical devices (ISO 14971)

ISO 14971:2019 defines a hazard as a potential source of harm, as ISO 12100 does for machinery. In medical devices a sequence of events leads from the hazard to a hazardous situation and possibly to harm; the risk is estimated from the probability of each step and the severity of the harm, and each risk is reduced with risk control measures. Use errors identified under IEC 62366-1 are treated the same way.

Hazard vs. risk

A hazard exists whether or not anyone is near it. Risk arises only when a person can be exposed, and combines the probability and severity of harm.

By knowledge.aitechdoc.world · Published September 25, 2026 · Last reviewed

Source: ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction

Definitions follow the cited standards and specifications. Where a source is a copyrighted publication, such as an ISO, IEC or EN standard, the definition is a close paraphrase, not a verbatim quotation, so as not to infringe copyright. We recommend reading the original publication. The sections “How it applies” are editorial commentary by AI TechDoc Knowledge and are not part of any standard.

Seen a mistake? Send us a note!