Glossary Updates16 new terms added to the glossaries · November 12, 2026, 21:23 CET
AI TechDocKnowledge

Glossary · Functional safety

Safety integrity

German: Sicherheitsintegrität

In functional safety (IEC 61508), safety integrity is the probability of a safety-related system satisfactorily performing the specified safety functions under all the stated conditions within a stated period of time.

  • Functional safety
  • OT security

In one sentence

Safety integrity is the probability that a safety-related system performs its safety functions as specified – graded as SIL or, on machinery, PL.

Example

The guard-locking function has a required PL d; its safety integrity is shown by the category, MTTFD, DCavg, CCF and the measures against systematic faults.

How it applies

  • Engineering: Safety integrity has two parts: hardware safety integrity (random hardware failures, expressed as PFH or PFDavg) and systematic safety integrity (design, software and process faults, addressed by methods, not by numbers).
  • Documentation: State the required integrity per safety function and the evidence that the realized function meets it.

In risk assessment, PL analysis and security analysis

  • Risk assessment (CE): The risk assessment sets how much safety integrity each safety function needs; on machinery it is stated as PLr under ISO 13849-1 or SIL under IEC 62061. See Safety Integrity Level (SIL) and Performance Level.
  • PL analysis: The PL is ISO 13849-1's grading of safety integrity: category, MTTFD, DCavg and CCF cover the hardware part, the requirements for software and for avoiding systematic faults cover the rest. Both parts must be met.
  • Security analysis: Safety integrity assumes the system is not deliberately manipulated. IEC 61508 therefore asks for a security threat analysis when malevolent action is foreseeable and points to IEC 62443; a manipulated system has no stated safety integrity left.

Naming this term in a document never shows conformity; the risk assessment, the validation of the safety functions and the security risk assessment do. EN 50742 is a CENELEC draft as of the review date: it is neither law nor a source of presumption of conformity.

Safety integrity vs. reliability

Reliability is the probability that a system works at all; safety integrity is the probability that it performs its safety functions. A system can stop often (low reliability) and still be safe, if every stop leads to the safe state.

By knowledge.aitechdoc.world · Published October 12, 2026 · Last reviewed

Source: AI TechDoc Knowledge editorial definition, based on IEC 61508, ISO 13849-1 and IEC 62443

Definitions follow the cited standards and specifications. Where a source is a copyrighted publication, such as an ISO, IEC or EN standard, the definition is a close paraphrase, not a verbatim quotation, so as not to infringe copyright. We recommend reading the original publication. The sections “How it applies” are editorial commentary by AI TechDoc Knowledge and are not part of any standard.

Seen a mistake? Send us a note!